Installation skill of BXX series explosion-proof power overhaul box

 The splicing device shall be of a structure suitable for fixing the explosion-proof distribution box to provide power to the mobile electrical equipment, and the part connecting the thick rubber-insulated flexible cable shall be of a sealing pad suitable for its shape and a device preventing cable stripping.

The method of wiring: for the laying of mobile wires, the minimum length necessary for the explosion shall not be too tight, and appropriate winding frame or suspension device may also be used to prevent the moving wires from being damaged and suffering from unnecessary tension when moving or using.

Fixed and mobile power supply wires, must adopt socket type plug device connecting fixed and mobile power supply wire. At this point, in the wiring connection part of the socket, plug device grounding pole must be instead of metal shell, or with wiring and firm connection. Move the wire connected to the mobile electrical equipment must move the mobile wire directly into electrical equipment. Mobile wires may not be directly connected with each other, if must be connection, the connection must be used ceramic plug device.

The installation of explosion-proof distribution box in the project is a technical job, which requires the on-site guidance and assistance of experienced and skilled electricians, so as to enable the installation personnel to conduct installation and construction. In order to avoid the occurrence of non-standard installation techniques in the process of wiring and installation.